Huawei Y320-u01 Usb Drivers For Mac

We have Huawei Y530 and Y300 smartphones. When we connect either of these with the USB cable to either Windows 7 or Windows 8.1, the operating systems say 'USB Device Not Recognized'. No USB driver came with the phones when we bought them.

• Huawei Y320-u01 Usb Drivers For Mac Download

Sep 21, 2018 - HUAWEI C2900I USB DRIVERS - My Account Sign in Create account. You may also need: NETGEAR PS121 DRIVER FOR MAC. It is simply the world famous unlocking software to unlock Vodafone, Huawei. Huawei firmware update / upgrade /downgrade software for f Download Huawei flash. 1 Huawei Y310 1 Huawei Y320-U10 1 Huawei Y330-U01 1 Huawei درخواست. By downloading and installing the Huawei USB drivers given here in your.

On the Huawei website for these phones there is no USB driver to download, e.g. On the Y530 page it says 'Sorry, no results were found': On the Huawei website under popular downloads, I found: ' Huawei Android Phones USB Driver' which is a zip file which contains DriverSetup.exe. I executed this and it installs the driver software, allows me to install them: And then reports that they were installed: However, after installing this on both Windows 7 and Windows 8.1 on two different computers, even after rebooting both machines, the Huawei Smartphones still are not recognized via USB cable, the operating systems still say: ' USB Device Not Recognized'.

What else can I do to get Windows to recognize these Huawei smartphones via USB? I have Huawei Ascend Y300 and had lot of trouble getting it in developer mode for Android app dev.

However, once I installed on my Windows 8.1 laptop it started showing up on ADB: Here are some additional tips that might help:. Before turning Developer Settings ON, turn FASTBOOT off on your Android phone. Also, restart the phone. With Developer Settings On, Stay Awake checked connect the phone to your PC. Needless to say, have Device Manager running and Android Studio running, to see how your device shows up. I had trouble getting access to the drive once connected via USB to my PC using my Y6II.

Once you plug the lead in, it kept saying charging only. After I plugged the USB lead in, I swiped down from the very top of the screen and it then gave me options to either charge only or to access photos or files. Once I selected the files box, Windows 7 installed some more drivers and finally the standalone drive window appeared and I was able to gain access to the internal memory of the phone. Unfortunately it would appear that you have to swipe down from the top of the screen every time you plug in your phone to access the drive.

I hope this helps anyone else puzzled with the charging only message.

What firmware are you currently using? Stock 675 68,18% AllegroROM 16 1,62% MIUI v5 31 3,13% New Allegro ROM 10 1,01% Samsung Galaxy S4 mod 21 2,12% HibridROM 7 0,71% ColorOSv2 15 1,52% LeWa OS 21 2,12% Yandex Whale 15 1,52% KitKat (fake) 53 5,35% MIUI 22 2,22% Light & Fast 4 0,4% AOSP ROM 8 0,81% LEWA port with 4403 4 0,4% Xperia Honami 19 1,92% Nokia X 9 0,91% CyanoxygenXinvinity 20 2,02% MuseUI 8 0,81% S5 NOTE-3 32 3,23% Total Votes. In connection with the periodic influx of people with messages: 'the device has been jammed.What to do?'

, I decided to write a short description of those things that you should not do, so as not to 'scorch' the device. So, you decided to flash your device for the first time.

Do not flush the device if the battery charge is less than 30% Do not plug the cable while flushing the device. And in general, try not to touch it Do not format the device if Windows prompts you to do this Never touch system files if you are not sure of your actions Be sure to make a backup before installing any modifications, fixes using CWM, if there is no feedback about them that they work on your device.

You can make a backup like in the CWM recovery itself, or in the Titanium Backup program. However, if you are not sure of your actions, then Titanium Backup is not recommended for installation Do not try to install the firmware from another device, about which there are no reviews and instructions, which say that this firmware is working on your device, if you are not familiar with the porting issue Be attentive to all instructions and instructions related to flashing the device. Do not flash the device if you have at least the slightest lack of confidence in your abilities.

Before proceeding to the firmware, think about what you need more - a normally working (albeit not ideal) device, or an ideal 'brick' on the shelf. These instructions apply to the Y320-U10 (Beeline Smart, Orange Tiga) and Y320-U30. For other modifications of Huawei Y320, the instruction may vary. Before beginning any manipulation with the firmware (changing system files, installing custom recovery or a modified kernel), make sure to backup your firmware using MtkDroidTools or SP Flash Tool. This will allow you to avoid many problems in the future and, if necessary, restore everything as it was.

It is also desirable to make a separate backup NVRAM - this will avoid problems and restore the calibration and IMEI in case of not very successful firmware. Installing Drivers. Installing drivers for working with MtkDroidTools Before working with the MtkDroidTools utility, we need to install the ADB (Android Debugging Bridge) This is done as follows: 1. To start, we connect the device to the computer via USB. Among the devices that appear, we find a disk drive with a Mobile Partner disk (or Beeline Smart, depends on the firmware of the device) and copy the contents somewhere.

If this did not work (regardless of the reason), then download and unpack itarchive. Go to the phone settings and enable debugging via USB. If you did not find the developer menu in the settings, then go to 'Settings' - 'About the phone' - click several times (5-7) on the 'Build number'. Or you can download the USB Debug program from the market. When it starts, it immediately takes us to the developer menu, then we do everything as in the screenshots. 3.Connect the phone to the computer using a USB cable, and do not press 'On.

USB drive ' 4. We will need: SP Flash Tool, MtkDroidTools and installed drivers. Create a scatter. We go into the settings of the smartphone in the menu item 'Security' and put a dummy on 'Unknown sources.' If you have not turned on USB debugging yet, go to the smartphone settings in the menu item 'About phone' and repeatedly tap on 'Assembly number', as you see the inscription 'you became a developer', go to the menu and go to the new activated menu item 'For Developers ', there put a daw on' Debugging on USB '. Connect the phone to your computer.

Install the driver (see above), if it is not already done. Start MtkDroidTools and wait when it connects to the phone (see the lower left corner of the program). We press the button 'Block map', the window with the map will appear.

In this window we press the button 'Create a scatter file' and save the file (the name is better not to change). Sometimes MtkDroidTools creates an incorrect scatter (the old type, for the firmware may not be usable). Then we take Item 2. Reading ROM from the phone. 2.1 Preparation Running SPFlashTool We open the saved scatter (in the list there will be blocks with addresses) Go to the Read back tab Add a block (Add button) Double click to open the added block, specify the name of the file to save (starts with ROM) Next, in the window that appears, enter the second field in the cache block from the scatter file (you can open it via notepad , for Beeline Smart it's 0x32B40000) and click OK.

Note: 1) If the file is an old type, then you immediately find the correct cache block address without problems, opening it with notepad 2) If the file is a new type, then in this case you need to enter the address of the cache block with the mark linearstartaddr 2.2 Reading We disconnect the phone from the computer, if it has not already been done. Turn off the phone Pull and re-insert the battery In the program SPFlashTool we press the button Read back Connect the phone to the USB in the program must run first red, then the blue bars progress. If you do not run, try to turn off the phone, distort the battery, and then connect it to your computer again. If it does not work, then it means that there are problems with the drivers, re-read the header. The process can take up to 20-25 minutes.

After the process is over, a green circle appears, now you can disconnect the phone from the computer and turn it on. SPFlashTool can now be closed. Preparing the blocks for the firmware Again we open MtkDroidTools and connect the included phone. Make sure that MtkDroidTools sees it.

Go to the root, backup, recovery tab Click the button 'Create a backup from ROM flash' and select the previously saved file from the program SPFlashTool. The program will offer to automatically create a CWM, patch boot - this is at your discretion (but if you want a clean backup, and it is recommended, then refuse patching). The backup will appear in the MtkDroidTools backups.

Now you need to save the backup, they can always return the phone to its original state. In addition to the folder with a bunch of files from MtkDroidTools, I recommend also saving the ROM file for reinsurance. Important information on these instructions. Disconnect from the computer all unnecessary, smartphone, too.

Restart the computer to avoid errors due to the operation of other programs. Plug the cable directly into the computer, but do not plug it into the machine. Do not use extension cords, splitters, or the like. Launch the SP Flash Tool, point to. scatter.txt in the folder with the desired firmware. (You can use the backup created and prepared in MtkDroidTools. Scatter.txt also creates it) Below you should see a list of partitions, their addresses and paths to the corresponding firmware files.

Below, tick the sections that will be stitched, from the others - remove (for example, you can choose only recovery, only boot or only logo). If you want, you can change the paths to the files you need. (For example, if you need to flash another boot, logo or recovery).

Be sure to remove the tick from the 'PRELOADER', otherwise you can get a brick. It is also not recommended to sew the section 'UBOOT' 6.

In the flash, click the Download button 7. Remove the battery from the Smart 8.

Plug the cable into the smart. Insert the battery.

After that, the firmware should go. Do not try to format the device in the SP Flash Tool, it can lead to almost irreparable results!!! For normal firmware, this is not necessary! As the mode of operation of the SP Flash Tool, you can use only the 'Download only' mode.

The rest - only for professionals and very experienced users. Need SP flash tool, firmware / full backup for it, driver. Start the SP Flash Tool, go to Option - Connection - in the USB tab, set w / o battery. Open the file scatter, remove the checkmarks from all points except PRELOADER and click Download.

We take out the battery from the phone and connect it to the computer. If the drivers are installed correctly, the firmware will start. We are waiting for the end of the process. If the firmware does not start, you need to press the power button or the volume button (for someone like, try). Disconnect the phone from the computer. In the SP Flash Tool, go to Option - Connection - in the USB tab, return auto detect; Return the removed ticks to the sections of the firmware, and with PRELOADER shoot. We put the battery in the phone and connect it to the PC.

We are looking forward to the end. If you do not turn on yourself, then disconnect the phone from the PC, jam the battery and turn it on. If it does not load, we do wipe data / factory reset in recovery. V100R001C17B214 ( China Unicom) Has provided: For SP Flash Tool V100R001C17B500, Android 4.0 V100R001C17B500 China Mobile China Telecom China Mobile Firmwares for Y320-U10, Y320-U30 and Y320-U151 also available on the website China Mobile - Before installing, make sure to backup your firmware in all available ways. So you will protect yourself from possible problems.

Huawei Y320-u01 Usb Drivers For Mac Download

Y320- U01For a spoiled phone, the responsibility lies solely with you. Mod Rum OPPO Mod Rum OPPO has provided Mod Rum OPPO Y320- T00LolliFox 1.10 (Latest version) XFlat XFlat XFlat XFlat Y320- C00Android 4.1 Patches for XFlat v2, v3, + swap Ragexperia v3.5 Gazed.